GALFER HYDRAULIC HOSES MUST BE INSTALLED BY A PROFESSIONAL CERTIFIED MOTORCYCLE MECHANIC. ALL OTHER INSTALLATIONS WILL VOID WARRANTY AND LIABILITY FROM THE MANUFACTURER, THE FOLLOWING ARE TIPS FOR INSTALLERs ONLY.
TWO LINE KIT INSTALL TIPS:
GALFER LINES WILL TRAVEL FROM THE MASTER CYLINDER ONE TO EACH CALIPER
( SEE FIG.1A) PLACE THE RIGHT LINE CLOSEST TO THE MASTER CYLINDER, FOLLOWED
BY THE LEFT LINE (THE LONGER OF THE TWO LINES). USE THREE CRUSH WASHERS
AT THE MASTER, AND TWO AT EACH CALIPER. TORQUE DOWN THE BANJO BOLTS
(PROVIDED BY GALFER) TO 12-15 FT .LBS. MAKE SURE THAT THE LINES ARE NOT
BINDING WITH THE FAIRING OR HORN. CHECK FOR CLEARANCE BY PUSHING ON THE
FRONT END.
 FIG.1A |
 ZIP-TIE AT LOWER TRIPLE CLAMP |